Epoxy Filler for concrete surfaces.

Description:

This is a two component non-shrinking solvent free epoxy filler. It is high strength, providing the abrasion resistance and compressive strength higher than concrete. To be used as filler only. Suitable for properly prepared concrete surfaces.

Typical Applications:

• Suitable as fill as a part of a complete system exposed to a wide range of corrosive environments up to very high and immersed. Recommended for offshore environments, water inlets, cooling pipes, bridges and general infrastructure buildings. Recommended as a filler for cracks, blow holes, spalls and other surface imperfections irregularities in concrete substrates prior to over coating with a suitable coating system. Ideal for use on vertical concrete substrates or concrete floors. Can be applied with a trowel, putty knife or spatula.

Film Thickness Per Coat

Typical recommended specification range

Dry film thickness Wet film thickness -200-10000 μm

Wet film thickness -200-10000 μm

Theoretical spreading rate -5 - 0.1 m²/l